Material: | Iron |
---|---|
Usage: | for Experiment, for Air Conditioner, for Manufacture, for Refrigerate |
Flow Direction: | Centrifugal |
Pressure: | Medium Pressure |
Certification: | RoHS, UR, ISO, CE, CCC |
Protection Level: | IP55/IP65 |
Customization: |
---|
Suppliers with verified business licenses
The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace.
This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles.
It can be used for more than four years when the concentration of impurities is less than 200 mg/m3.
If it contains a lot of impurities, it also can be used, but it will shorten the service life.
The maximum operating temperature of the induced draft fan must not exceed 250°C.
The performance of the fan is expressed by parameters such as fan flow, full pressure, spindle speed, shaft power and efficiency.
Series no. |
5-06 series |
Feature selection |
|||||
Normal |
anti-corrosion |
wear-resisting |
High temperature |
anti-explosion |
Remarks |
||
Performance |
Impeller diameter |
800-1240mm |
|
||||
Rotation speed |
1450rpm |
|
|||||
Pressure range |
4051~1989Pa |
|
|||||
Flow range |
12028~76740 |
|
|||||
Structure |
Blade type |
Backward, Straight, Aerofoil type |
|
||||
Impeller support |
SWSI(Single Width, Single Inlet), DWDI(Double Width, Double Inlet), Overhung type |
|
|||||
Lubrication method |
Oil bath lubrication, grease lubrication, lubrication oil station |
Can be specified |
|||||
Cooling method |
Air cooling, Water cooling, Oil cooling |
Can be specified |
|||||
Driven mode |
Direct driven, Coupling driven, Belt driven |
Can be specified |
|||||
Gas composition |
Gas temperature |
Normal |
Customer request |
Customer request |
≥250ºC |
Customer request |
|
gas characteristic |
Clean gas |
Corrosive gas |
Particulate dust |
High temperature gas |
Flammable gas, explosive gas |
|
|
System configuration |
Motor brand |
Chinese famous brand, Siemens, WEG etc |
Can be specified |
||||
Impeller |
High quality carbon steel |
FRP, Stainless steel, Rubber Lining |
Wear-resistant layer or wear-resistant liner, ceramic patch |
High temperature high quality alloy steel |
FRP, Aluminum alloy |
Can be specified |
|
Air inlet cone |
High quality carbon steel |
FRP, Stainless steel, Rubber Lining |
High quality carbon steel |
High quality carbon steel |
High quality carbon steel |
Can be specified |
|
Casing |
High quality carbon steel |
FRP, Stainless steel, Rubber Lining |
High quality carbon steel |
High quality carbon steel |
High quality carbon steel |
Can be specified |
|
Air damper |
High quality carbon steel |
FRP, Stainless steel, Rubber Lining |
High quality carbon steel |
High quality carbon steel |
High quality carbon steel |
Can be specified |
|
Main shaft |
High strength carbon steel, Alloy structural steel |
Can be specified |
|||||
Bearing |
ZWZ, S-KF, F-A-G, NSK |
Can be specified |
|||||
Bearing housing |
Cast iron |
|
|||||
Foundation bolts |
GB799-1988 |
|
|||||
Option parts |
System base frame, Protective screening, Silencer, Inlet & Outlet flexible connections, Inlet & Outlet counter flange, Air damper, Electric actuator, Shock absorber, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibration sensor, Soft starter, Inverter, Special Electrical Motor, System monitoring Instrument. |
Suppliers with verified business licenses